Automatic Pallet Changer(APC) in CNC machine

Automatic Pallet Changer

In order to working with CNC machine to reduce the job setting and clamping cycle time on fixture one or more  additional pallet is being provided 

• Machining can be carried out on one pallet, while the others can be used for preparation (seating and clamping of work-pieces etc.)

•The palletizing system consists of two, or more pallets (per customer requirements).

Set of instruction carried out during command of Pallet change(M60)

•Program code : N01 M60;

•All axis return back to reference position(X, Y, Z and B axis).

•Pallet unclamp and air releases from seating cone

•Waiting pallet gets inside for machining  and machined pallet gets out.

•Pallet change takes place either by pallet lifting and rotating or sliding.

Important codes related with pallet change

•M10 : Pallet clamp ON

•M11 : Pallet clamp OFF

•M60 : Automatic pallet change

Clamping Function : Clamping force is ranged from 2.5kN ～ 40kN. It is possible to select clamping force depending on purpose.

Air-Blow and Seat Check :  Foreign substance is removed by air blow. Seating surface is provided with the air hole, seat check is possible if gap sensor is used.

Watch video on APC